Just Dreamin' Stamps: Floral Delight

Showing posts with label Floral Delight. Show all posts

Wednesday, May 21, 2025

Delightful Wishes Fault Line Thank You

This card was made using the "Fault Line" technique.

Daffodil Delight was used for the card base, which was cut to 9 1/2" x 4 1/4" and scored at 5 1/2". This will make it so the card base has a shorter front than the back, that is okay, this is what you want.

If you wanted to emboss the front of the card, now is the time to do that. For this card I used the Distressed Tile 3D Embossing Folder.

To make the fault line, you will need a smaller detail piece of Designer Series Paper, for this card I used the small yellow and brown printed Floral Delight Designer Series Paper (DSP). This should be cut to 2" x 4 1/4".

You will also need another piece of DSP that is a bolder print to fill in "the gap". For this card I used the floral print with the Pool Party background DSP from the Floral Delight DSP. This should be cut to 3" x 4 1/4".

Center the 2" x 4 1/4" DSP onto the short card front and gently tear the DSP and the card front horizontally together at the same time. Be careful the DSP has a tendency to slip, I had to tear a little, re-align the DSP and tear a little more, a couple of times.

Lightly sponge ink on the torn edges of the card front, for this card I sponged it with Daffodil Delight ink.

After the ink has dried, adhere the torn DSP pieces to the card front, leaving a small amount of the torn edge not attached to card so that you can slightly curl up the edges of the torn pieces. You will want to curl up both the DSP and the cardstock card front. See photo of card above for reference.

Use the 3" x 4 1/4" piece of DSP to fill in "the gap" left from tearing the card front in two by adhering this DSP to the back of the card front. To do this, adhere the bottom edge of the 3 x 4 1/4" piece of DSP to the back of the loose, torn card base front. Next, align this loose card base bottom to the attached card base front make sure your card front now measures 5 1/2" x 4 1/4" and then adhere it in place.

Because the inside of the card looked a little messy to me, I added a just shy of a 5 1/2" x 4 1/4" Daffodil Delight cardstock panel to the inside of the front panel to hide it.

The "Thank You" is from the retired Amazing Thanks dies and has been cut out in Pool Party cardstock.

The flowers on the bottom of the card front, were fussy cut from the Floral Delight DSP.

Glossy Dots Assortment were used for accent.

I hope you enjoyed my cards for today!

Join the Fun!

If you love paper crafting and are looking for a Stampin’ Up! demonstrator, I’d love to help! Shop through my Online Store to earn Stampin’ Rewards for free and discounted products.

And if you’re as passionate about crafting as I am, why not join my Stampin’ Up! team? As a demonstrator, you’ll get early access to the newest products, enjoy exclusive discounts, earn commission, and become part of an amazing global crafting community.

Become a Stampin' Up! demonstrator between May 6 - 31, 2025 and choose $165 worth of products for only $99! That's an extra $66 in products to kickstart your business! And your Starter kit comes with FREE shipping, FREE business supplies AND a bonus, FREE Paper Pumpkin Kit!

If that sounds exciting to you, let’s chat! I’d love to welcome you to my team.

Happy crafting! ✂️💖

tams# 94117

Product List

Add All to Cart

Friday, May 16, 2025

Delightful Wishes Shutter Birthday Card

This shutter card was made using the gorgeous Floral Delight Designer Series Paper (DSP). This card was inspired by a card found on Pinterest made by Tricia's Stamping Creations.

Old Olive cardstock was used for the card base. The next layer is a panel from the Floral Delight DSP.

A Basic White cardstock square was cut out using the large Stylish Shapes square die and adhered to the center of the card front.

The flower in the center of the panel was cut out using the medium Stylish Shapes square and Floral Delight DSP. This panel was adhered onto the center panel using Stampin' Dimensionals.

Next, 1/4" x 5" strips were cut out using one of the more solid color sheets of the Floral Delight DSP. These strips were then adhered onto the card front around the center panel and trimmed to fit.

The "wishing" die-cut was cut out using the Delightful Wishes dies along with Daffodil Delight and Old Olive cardstock.

The sentiment is from the Delightful Wishes stamp set and has been stamped onto Basic White cardstock using Daffodil Delight ink. The sentiment was cut out using one of the Delightful Wishes dies. The sentiment has been backed with a Old Olive cardstock panel that had been cut out using the same Delightful Wishes die. Once cut out, the Old Olive panel was cut horizontally and adhered onto the sentiment panel.

Opal Rounds were adhered to the card front for accent.

The inside of the card has an Old Olive panel that was adhered to the Old Olive card base followed by a Basic White cardstock panel.

The sentiment on the inside of the card is from the retired Sunny Sentiments stamp set.

The flower in the lower right hand corner of the card was fussy cut from the Floral Delight DSP.

I hope you enjoyed my cards for today!

Join the Fun!

If you love paper crafting and are looking for a Stampin’ Up! demonstrator, I’d love to help! Shop through my Online Store to earn Stampin’ Rewards for free and discounted products.

If that sounds exciting to you, let’s chat! I’d love to welcome you to my team.

Happy crafting! ✂️💖

tams# 94113

Product List

Add All to Cart

Thursday, May 1, 2025

Beautiful Butterflies Mother's Day

This card begins with a Basic White cardstock card base. The next layer is Pool Party cardstock that has been topped with a Floral Delight Designer Series Paper (DSP) panel that was embossed using the Beautiful Butterflies Hybrid Embossing Folder.

The butterfly, from the Beautiful Butterflies stamp set, was stamped in VersaMark ink and then heat embossed using WOW! Gold Embossing Powder.

Once embossed, the butterfly was then colored using Stampin' Blends and cut out using the coordinating Beautiful Butterflies die.

The sentiment is from the Flower Cart stamp set and has been stamped in Pool Party ink onto Basic White cardstock. The sentiment was then cut out using one of the Mixed Labels dies.

Pool Party Glossy Dots were added for accent.

For the inside of the card, Pool Party cardstock was adhered to the card base, followed by a Basic White cardstock panel.

The butterfly is from the Beautiful Butterflies stamp set and has been stamped in Pool Party ink.

I hope you enjoyed my card for today!

Join the Fun!

If you love paper crafting and are looking for a Stampin’ Up! demonstrator, I’d love to help! Shop through my Online Store to earn Stampin’ Rewards for free and discounted products.

If that sounds exciting to you, let’s chat! I’d love to welcome you to my team.

Happy crafting! ✂️💖

tams# 93881

Product List

Beautiful Butterflies Photopolymer Stamp Set (English)

[164608]

Flower Cart Photopolymer Stamp Set (English)

[162776]

Beautiful Butterflies Hybrid Embossing Folder

[164614]

Mixed Labels Dies

[164652]

Floral Delight 12" X 12" (30.5 X 30.5 Cm) Designer Series Paper

[164700]

Basic White 8 1/2" X 11" Cardstock

[166780]

Pool Party 8-1/2" X 11" Cardstock

[122924]

Pool Party Classic Stampin' Pad

[147107]

Versamark Pad

[102283]

Pretty Peacock Stampin’ Blends Combo Pack

[161676]

Pool Party Stampin' Blends Combo Pack

[154894]

Soft Sea Foam Stampin' Blends Combo Pack

[154902]

Metallics Wow! Embossing Powder

[165678]

Glossy Dots Assortment

[158827]

Bone Folder

[102300]

Heat Tool (Us And Canada)

[129053]

Stampin' Seal

[152813]

Multipurpose Liquid Glue

[110755]

Paper Snips

[103579]

Paper Trimmer

[152392]

Stampin' Cut & Emboss Machine

[149653]

Add All to Cart

**At the time of writing this post some of the items featured on this card had moved to the Last Chance Products Category and may no longer be available.